• Your Cart is Empty
A skateboarder jumps while a drone flies overhead near a van.
A DJI Lito X1 flies about a skateboarder while a person standing against a van flies the drone

Frequently Asked Questions

DJI Lito Series

Product Comparisons

Which drones are most comparable to the DJI Lito series?

The DJI Lito series is best compared to the DJI Mini series. The following drones are the most suitable alternatives for comparison with each DJI Lito model:

  • DJI Lito 1: DJI Mini 3, DJI Mini 4K
  • DJI Lito X1: DJI Mini 4 Pro, DJI Mini 5 Pro

The Lito X1 has better technical specifications than the Mini 3, but weaker specs compared to the Mini 4 Pro. The Lito 1 has better technical specifications than the Mini 4K, but weaker specs compared to the Mini 3. Out of these, the Mini 5 Pro still remains the best of them all.


How does the DJI Lito 1 compare to the DJI Mini 4K?

The DJI Lito 1 features significant upgrades across its camera, vision sensing, flight capabilities, and video transmission systems. Key improvements include:

  1. Camera System: The DJI Lito 1 utilizes a 1/2 inch CMOS sensor integrated with a new image processing platform. Featuring an f/1.8 aperture, it delivers improved dynamic range. The drone supports video recording up to 4K/60fps, 4K/100fps slow motion, and 2.7K vertical orientation. Additionally, it offers intelligent shooting modes, including MasterShots, QuickShots, and Hyperlapse, to simplify the content creation process.
  2. Sensing System: Featuring new omnidirectional obstacle sensing [1], the DJI Lito 1 detects and avoids obstacles during forward and lateral tracking, allowing even novice pilots to operate the drone with enhanced ease, stability, and confidence. Furthermore, when operating in well lit environments with discernible surface textures, the aircraft can memorize flight paths to facilitate rapid takeoff and safe return, even in the absence of satellite signals [1].
  3. ActiveTrack [2]: The DJI Lito 1 features integrated ActiveTrack technology, with improved performance that balances speed, agility, and safety.
  4. Flight Performance [3]: The Intelligent Flight Battery provides up to 36 minutes of flight time and a maximum takeoff altitude of 4500 meters. Alternatively, the Intelligent Flight Battery Plus [4] extends flight time to 52 minutes with a maximum takeoff altitude of 3500 meters.
  5. Video Transmission: The DJI O4 video transmission system provides up to 15 km of 10-bit video transmission [5], delivering improved signal stability, advanced anti-interference capabilities, and superior image quality.
  6. QuickTransfer: The DJI Lito 1 supports remote activation through the DJI Fly app while within Bluetooth range, facilitating high speed file transfers at rates reaching 50MB/s [6].
  7. Battery Charging Efficiency [7]: Utilizing the DJI 65W Portable Charger and the Charging Hub, a single Intelligent Flight Battery charges in approximately 45 minutes, while an Intelligent Flight Battery Plus requires about 56 minutes. When charging three batteries sequentially, the total time is approximately 87 minutes for three standard Intelligent Flight Batteries or 130 minutes for three Intelligent Flight Batteries Plus.

Notes

  1. Omnidirectional obstacle sensing is functional only on surfaces featuring discernible textures and in lighting conditions above 5 lux. Flight route memorization requires discernible textures and illumination exceeding 10 lux. Please refer to the official DJI website or the user manual for complete specifications and details.
  2. ActiveTrack functions reliably only when specific flight conditions are met. For further details, please consult the product page on the official DJI website or the corresponding user manual.
  3. Flight time measurements were conducted in laboratory settings, while maximum takeoff altitude was tested in high altitude environments. For comprehensive information, please visit the specifications page on the official DJI website.
  4. The Intelligent Flight Battery Plus is not supported by this product in the EU or UK. Please ensure you always comply with all local laws and regulations before flying.
  5. This measurement was conducted in an open outdoor environment, free of interference, and in compliance with IC standards. The data represents the maximum communication distance for one-way, non-return flights. Always monitor the Return to Home (RTH) prompts within the DJI Fly app during your flight.
  6. This measurement was conducted in a laboratory environment with minimal interference in regions that support both 2.4 GHz and 5.8 GHz frequencies. Actual download speeds may fluctuate based on current operating conditions.
  7. Charging times were measured in a controlled environment at a temperature of 25° C (77° F). Actual charging durations may be longer due to higher ambient temperatures or fluctuations in regional mains voltage.

How does the DJI Mini 3 compare to the DJI Lito X1?

The DJI Lito X1 features significant upgrades across its camera, vision sensing, flight, and video transmission systems. Key improvements include:

  1. Camera System: The DJI Lito X1 is equipped with a 1/1.3 inch CMOS sensor and a new image processing platform, supporting video recording up to 4K/60fps HDR, 4K/100fps slow motion, and 2.7K vertical orientation. For HDR footage, it provides a dynamic range of up to 14 stops [1]. The drone incorporates DJI's portrait optimization technology [2] and includes intelligent shooting modes such as MasterShots, QuickShots, and Hyperlapse to simplify content creation.
  2. Sensing System: The DJI Lito X1 is equipped with forward facing LiDAR to provide omnidirectional obstacle sensing [3]. It actively detects and avoids obstacles like buildings during flight and return, ensuring greater safety for urban night photography. Additionally, the drone can memorize flight paths in well lit environments, facilitating rapid takeoffs and safe returns even in the absence of satellite signals [3].
  3. ActiveTrack [4]: The DJI Lito X1 features upgraded ActiveTrack technology, delivering enhanced performance that achieves a better balance between speed, agility, and safety.
  4. Flight Performance [5]: The Intelligent Flight Battery delivers up to 36 minutes of flight time with a maximum takeoff altitude of 4500 meters, while the Intelligent Flight Battery Plus provides up to 52 minutes of flight time with a maximum takeoff altitude of 3500 meters.
  5. Video Transmission: The DJI O4 system enables up to 15 km of 10-bit video transmission [6], delivering improved signal reliability, advanced anti-interference performance, and exceptional image quality.
  6. Off-State QuickTransfer: Equipped with 42GB of internal storage, the DJI Lito X1 supports remote activation via the DJI Fly app while within Bluetooth range, allowing for high-speed file transfers at rates up to 50MB/s [7].
  7. Battery Charging Efficiency [8]: When using the DJI 65W Portable Charger with the Charging Hub, a single Intelligent Flight Battery charges in approximately 45 minutes, while the Intelligent Flight Battery Plus takes about 56 minutes. To fully charge three batteries, the process takes approximately 87 minutes for the standard Intelligent Flight Batteries or 130 minutes for three Intelligent Flight Batteries Plus.

Notes

  1. The 14-stop dynamic range is available for video recorded in Auto mode; however, this feature does not apply to slow-motion footage or 2.7K vertical video at 48, 50, or 60 fps.
  2. This feature is exclusively available in Normal mode and is not supported while using D-Log M.
  3. Omnidirectional obstacle sensing is only effective when operating over surfaces with discernible textures in lighting conditions exceeding 5 lux. Similarly, flight route memorization requires discernible textures and illumination levels above 10 lux. Please refer to the official DJI website or the user manual for further details.
  4. ActiveTrack functions correctly only when specific flight conditions are met. For further details, please consult the product page on the official DJI website or the product's user manual.
  5. Flight time was measured in laboratory conditions, whereas the maximum takeoff altitude was tested in a high-altitude environment. For further details, please refer to the specifications page on the official DJI website. Please note that regulatory requirements vary by location; within the EU and UK, the Plus battery is compliant only for use with the aircraft included in the DJI Lito X1 Fly More Combo Plus (DJI RC 2). Always verify and comply with local laws and regulations before flying.
  6. This measurement was recorded in an unobstructed outdoor environment, free from interference and in accordance with IC standards. The provided data reflects the maximum one-way, non-return communication range. Please ensure you remain attentive to all Return to Home (RTH) notifications within the DJI Fly app during your flight.
  7. This measurement was taken in a controlled laboratory environment with minimal interference in regions where both 2.4 GHz and 5.8 GHz frequencies are supported. Please note that actual download speeds may vary based on real-world conditions.
  8. Charging time was measured in a controlled environment at 25° C (77° F). Actual charging times may vary due to higher ambient temperatures or fluctuations in regional mains voltage.

General

How do I activate my DJI Lito 1 / DJI Lito X1?

Using the DJI RC-N3 Remote Controller: Connect your internet-enabled mobile device to the remote controller, then link it to the DJI Lito via the DJI Fly app. Follow the on-screen prompts to complete the activation of your DJI Lito.

Using the DJI RC 2: When using the DJI RC 2 for the first time, connect to the internet via Wi-Fi or a smartphone hotspot and follow the on-screen prompts in the DJI Fly app to activate the controller. Once activated, link the remote to the DJI Lito through the app and follow the provided instructions to activate the aircraft.


Do I need to install an app to fly the DJI Lito 1 or DJI Lito X1?

The DJI Lito series is compatible exclusively with the DJI Fly app. To ensure you have the most up-to-date software, please visit the official DJI website and navigate to the DJI Lito Downloads page to install the latest version.


Is the DJI Lito 1 / DJI Lito X1 waterproof?

No. Please avoid contact with water during operation, as it may damage the device. If it begins to rain during your flight, return and land as soon as possible, and ensure the drone is completely dry both inside and out before using it again.


Do I need to install an app to fly the DJI Lito 1 / DJI Lito X1?

The DJI Lito 1 and DJI Lito X1 are compatible exclusively with the DJI Fly app. You can download the latest version from the DJI Lito series Downloads section on the official DJI website.

If you are using the DJI RC 2 as your remote controller, the DJI Fly app comes pre-installed.


Is the DJI Lito 1 or DJI Lito X1 waterproof?

No. Please keep the device away from water during use to prevent potential damage. If it begins to rain while you are in flight, return and land immediately. You must ensure the drone is completely dry, both inside and out, before attempting to operate it again.

Flight

Does the DJI Lito 1 or DJI Lito X1 have obstacle sensing?

Thanks to the integrated omnidirectional obstacle sensing system*, the DJI Lito 1 and DJI Lito X1 can identify and bypass obstructions from the front or sides while tracking. This advanced safety feature allows even novice pilots to operate the drone with greater stability and confidence. Taking things a step further, the DJI Lito X1 features an integrated forward-facing LiDAR sensor. This significantly improves the Lito X1's precision in detecting and avoiding small obstacles in its flight path.

* The omnidirectional obstacle sensing system requires surfaces with clear textures and ambient lighting above 5 lux to function correctly. For comprehensive guidance and specific operational requirements, please consult the user manual or the product page on DJI's official website.

Remote Controller and Video Transmission

What controllers are compatible with the DJI Lito 1 and DJI Lito X1?

DJI RC-N3 Remote Controller and DJI RC 2 are compatible with both drones in the DJI Lito series.


Could you walk me through the correct way to position the antennas on my controller to get the best signal?

To ensure you have the strongest possible signal, make sure the antennas are pointed directly toward the drone while you're flying.


What is the video transmission range of the DJI Lito 1 and DJI Lito X1?

With either the DJI RC 2 or DJI RC-N3 remote controller, you can achieve a transmission range of up to 15 km*.

These figures were recorded in an open, interference-free outdoor setting under IC compliance standards. Please note that this data represents the maximum range for a one-way flight only. To ensure a safe return, always monitor the RTH (Return to Home) alerts within the DJI Fly app throughout your mission.

Firmware Update

How do I update the firmware on the DJI Lito 1 or DJI Lito X1?

Once your drone is linked to the remote controller, the DJI Fly app will automatically notify you if a new firmware version is released. Simply follow the on-screen prompts to update the aircraft, controller, battery, and any connected peripherals. Alternatively, you can perform updates using a computer via the DJI Assistant 2 (Consumer Drones Series) software, which is available for download on the DJI Lito 1 and Lito X1 official product pages.


What are the common reasons why a firmware update might fail?

  1. Low Power: The battery on either the drone or the remote controller has dropped below 20%.

  2. Power Interruption: The drone or controller was turned off while the update was in progress. If this occurs, restart both devices and attempt the process again.

  3. Connection Issues: Your internet or network connection was lost while the firmware was downloading.

  4. App Interference: You switched away from the DJI Fly app to another application on your smartphone during the download process.

  5. Overheating: The aircraft's internal temperature is too high. If you receive a temperature warning, power down the drone, let it cool in a shaded area, and then try the update again.

Please note that it is normal for the drone to reboot several times throughout the update process; once the installation is finished, the aircraft will shut down automatically.