Frequently Asked Questions
DJI Mavic 4 Pro
DJI Mavic 4 Pro
How does the DJI Mavic 4 Pro improve upon the DJI Mavic 3 Pro? What are its most significant upgrades?
The DJI Mavic 4 Pro introduces significant advancements across various aspects, including the camera system, vision sensing, flight performance, and video transmission. Key improvements include:
*Measured under controlled conditions in D-Log mode, excluding slow-motion and cropped vertical video recording.
**Tested in windless environments at sea level, with the aircraft flying forward at a constant speed of 9 m/s (32.4 km/h), from 100% to 0% battery.
***Tested in open environments without interference, with FCC compliance. Data reflects one-way, non-return flight distances.
****Effective on surfaces with discernible textures in lighting conditions of 0.1 lux or brighter. Refer to DJI’s official website or product manual for details.
*****Requires well-lit conditions exceeding 10 lux. Refer to official DJI resources for more information.
What certification level does the DJI Mavic 4 Pro hold in Europe?
The DJI Mavic 4 Pro holds C2 certification from the European Union Aviation Safety Agency (EASA).
Can the DJI Mavic 4 Pro be used in water?
No, keep the device away from water to prevent potential damage. If rain starts during flight, land immediately and allow the aircraft to dry completely—inside and out—before using it again.
What app do I need to fly the DJI Mavic 4 Pro?
The DJI Mavic 4 Pro is exclusively compatible with the DJI Fly app. You can download the latest version from the DJI Mavic 4 Pro Downloads page on the official DJI website.
For users with the DJI RC Pro 2 or DJI RC 2 remote controller, the DJI Fly app comes pre-installed.
What key considerations should I keep in mind about the forward-facing LiDAR?
Keep the forward-facing LiDAR free from dirt and debris, as buildup may cause inaccurate obstacle detection.
The LiDAR functions automatically in moderate lighting but may struggle in bright conditions. Be mindful of ambient light to ensure safe flight operations.
What advantages does the forward-facing LiDAR offer?
Improved Nighttime Obstacle Detection – Even in extremely dark environments with less than 0.1 lux of ambient light, where the vision sensing system becomes ineffective, the forward-facing LiDAR continues to detect obstacles, ensuring the drone can stop in time to prevent collisions.
Enhanced Safety for Nighttime RTH – During return-to-home operations at night, if the vision sensing system fails, the drone relies on forward-facing LiDAR to identify obstacles and ascend to avoid them*, making the return flight more secure.
What are the main features of the Infinity Gimbal?
The Infinity Gimbal provides an extended roll range and a higher upward-tilt angle, enabling fluid, multi-angle camera movement. However, vertical shooting remains restricted in terms of gimbal angle and motion speed due to mechanical limitations.
Does the Infinity Gimbal have any limitations when used to shoot vertically?
To optimize the balance between aircraft size and weight, yaw-axis travel is restricted to ±22°, which limits the gimbal's tilt range in vertical mode. This constraint reduces maximum acceleration and speed while increasing braking distance. If you need to expand the gimbal's tilt range for vertical shooting, you can enable "Tilt Angle Expansion in Portrait." However, sudden movements may push the gimbal to its limit, potentially causing image jitter. For an even broader pitch range in vertical mode, 2.7K vertical shooting is recommended.
How can I activate HDR mode on the DJI Mavic 4 Pro?
The DJI Mavic 4 Pro automatically enables HDR mode for most shooting specifications.
However, HDR is unavailable in the following settings:
Photo:
28mm Main Camera: 100MP
70mm Medium Tele Camera: 48MP
168mm Tele Camera: 50MP
Video:
28mm Main Camera: Slow Motion
70mm Medium Tele Camera: Slow Motion, 2.7K Vertical Shooting (48-60fps)
168mm Tele Camera: Slow Motion, 2.7K Vertical Shooting (48-60fps)
How does the Dual Native ISO Fusion function on the DJI Mavic 4 Pro?
In most shooting scenarios, the DJI Mavic 4 Pro's image sensor utilizes the Dual Native ISO Fusion algorithm, combining signals from two analog gain circuits to enhance dynamic range.
However, Dual Native ISO Fusion is not supported in the following cases:
28mm Main Camera: 100MP
70mm Medium Tele Camera: 48MP
168mm Tele Camera: 50MP
For these modes, the dual native ISO values are 100 and 400. At ISO below 400, the low-gain analog circuit is applied, while at ISO 400 or higher, the high-gain analog circuit is used.
28mm Main Camera: Slow Motion
70mm Medium Tele Camera: Slow Motion, 2.7K Vertical Shooting (48-60fps)
168mm Tele Camera: Slow Motion, 2.7K Vertical Shooting (48-60fps)
For these video modes:
When filming in Normal, D-Log M, or HLG color profiles, the dual native ISO values remain 100 and 400. The low-gain analog circuit is applied below ISO 400, while the high-gain circuit activates at ISO 400 or higher.
When filming in the D-Log color profile, the dual native ISO values shift to 400 and 1600. Below ISO 1600, the low-gain circuit operates, while at ISO 1600 or higher, the high-gain circuit is applied.
What important precautions should be considered when recording, playing, and editing 6K H.264 10-bit 4:2:2 video using the Mavic 4 Pro 512GB in the Creator Combo?
If you encounter playback or editing compatibility issues on macOS, consider these solutions:
Upgrade macOS – If your version is below 14.7.5, update your system to 14.7.5 and try again.
Adjust Hardware Decoding – On macOS 15 or later, if video decoding issues arise, disable hardware decoding acceleration in your playback or editing software settings. For software like Final Cut Pro, where hardware decoding cannot be turned off, consider transcoding your footage before importing it for editing.
Do DJI RC 2 and DJI RC Pro 2 support fast charging?
Yes, the USB-C port allows up to 9V/3A power input when using a 9V/3A charger. Additionally, DJI RC Pro 2 supports the PD protocol and enables fast charging up to 65W.
Can you customize the buttons on the DJI RC 2 or DJI RC Pro 2?
In the DJI Fly app on DJI RC 2 and DJI RC Pro 2, you can personalize the functions of buttons like C1, C2, and the right dial, allowing for efficient and quick operations.
What are the main improvements of the DJI RC Pro 2 when compared to the DJI RC Pro?
Features a new 7-inch large screen with enhanced brightness, reaching 2000 nits at peak and 1600 nits sustained, offering more precise color rendering.
The collapsible screen powers on when extended, with joysticks unfolding simultaneously.
Rotatable screen for versatile viewing angles.
Top-mounted, adjustable tilt screen that ensures an unrestricted holding angle.
New dial button for quick parameter adjustments in Pro mode and faster album browsing.
Enterprise-grade multi-beam high-gain antennas improve transmission performance, enabling O4+ Video Transmission when paired with the DJI Mavic 4 Pro.
Built-in microphone with compatibility for the DJI Mic series*, delivering high-quality audio for live streaming, even on third-party apps.
*Sold separately.
Can you install 3rd party apps on the DJI RC Pro 2?
Yes, third-party apps can be downloaded via the built-in browser or installed using APK files from a microSD card.
However, DJI is not responsible for any permission or security risks associated with third-party apps. If an installed app disrupts controller performance, it is recommended to remove the app or restore the controller to factory settings.
Can you install 3rd party apps on the DJI RC 2?
No.
Wireless interference levels vary depending on the environment, affecting the maximum transmission distance.
Unobstructed Environments:
Strong Interference (urban areas): ~1.5-6 km
Medium Interference (suburban areas): ~6-15 km
Low Interference (suburbs/seaside): ~15-30 km
Obstructed Environments:
Low Interference + Buildings: ~0-0.7 km
Low Interference + Trees: ~0.7-4.5 km
Tested under FCC standards in typical obstructed and unobstructed environments. These values serve as reference only and do not guarantee actual transmission distances.
How can I update the DJI Mavic 4 Pro's firmware?
When the aircraft is connected to the remote controller and a new firmware version becomes available, the DJI Fly app will prompt you to update. Follow the instructions to update the firmware for the aircraft, remote controller, battery, and other components.
Alternatively, you can update via DJI Assistant 2 (Consumer Drones Series) on a computer. The latest software version is available for download on the DJI Mavic 4 Pro Downloads page from DJI’s official website.
What factors can cause a firmware update failure?
The aircraft or remote controller has a battery level below 20%.
Either device powers off during an update. If this occurs, restart both and attempt the update again.
The network connection is lost during firmware download.
The smartphone interface switches to other apps while downloading firmware.
During the update process, the aircraft will restart multiple times and will automatically power off once the update is complete.
How does the DJI Mavic 4 Pro's parallel charging function?
Paired with the DJI Mavic 240W Power Adapter, the Mavic 4 Pro Parallel Charging Hub can fully charge one Intelligent Flight Battery in just 51 minutes. Additionally, it can charge three Intelligent Flight Batteries in parallel within 90 minutes via the Mini SDC interface.
To maximize efficiency, the Parallel Charging Hub prioritizes the battery with the lowest charge. Once all batteries reach the same charge level, it switches to parallel charging.
*Charging time is based on tests conducted at 25°C. Actual times may vary due to ambient temperature and regional voltage differences.